Showing 1–12 of 23 results
Used for saw-cut installation where a 3/16” groove is cut into the concrete or asphalt and the wire is installed and sealed (using loop sealant) into the surface. Direct Burial Loops are installed under concrete, asphalt, pavers or gravel roads. Wire is UL 493 certified designed for a direct burial application.
BlueGuard Entry is activated as soon as the phone gets into the 33 foot range. The BlueGuard FE verifies the phone’s unique ID and then activates the equipment being controlled.
Answers to intermittent power loss. BB100 delivers dependable back-up power for any single device with 115 VAC power (Up to two Byan Systems gate operators). The BB200 delivers power to any two devices requiring 115 VAC power, Up to four Byan Systems gate operators.
Cartell’s free exit systems automatically open your gate without the use of a remote, key fob or keypad, when vehicles exit the property. The CP3-5W comes with sensors covering 12 ft. wide driveways from the side, works with any gate operator, is a fully self-contained system, no external circuit board to install, solar friendly, universal voltage, three wire or five wire model, and the average field life is 12 years with a five year warranty.
Just a simple `click’ of this radio transmitter button is all that is required to open gates, parking arms, doors, and commercial roll-up doors.
Rugged high-tech polymer rollers that glide with ease, replacing those made of antiquated metal castings. Durable and strong, smooth, galvanized steel chassis and maintenance free. Sizes: 2” Square pipe gate frame, 2” O.D. frame size, 2 1/2” O.D. frame size, 3”-4”- 6 5/8”
Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. Plug in detector- use with DKS gate operators.
DoorKing’s Power Inverter & Backup Systems are designed to provide backup power for your vehicular gate and access system when primary power fails. These systems convert DC battery power to AC power to keep your system operable at all times. Provides 120 Volt AC power to all components including gate operator, access control system, loop detectors, reversing devices, emergency vehicle access devices etc. The Model 1000 is designed to provide power for two gate operators and related access control system accessories while the model 2000 can provide power for up to six gate operators and related access control accessories.
Includes photocell to keep lights off during daylight, a sensor that covers 12 foot wide driveways from the side, supports up to 100 sensors. The CF-@C also has ability to support other sensing devices. This system automatically turns up to 1800 watts of lights on and puts them on a timer when vehicles are detected at night.
The Infrared Photo eye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators.
The LP D-Tek is a detector for applications in which vehicle detection is needed and low power consumption is desired. It has a low 9 mA current draw that makes it ideal for solar applications and gate or door operators that require many accessories drawing from the same power supply.